background image

IMPORTANT INFORMATION

9

Warranty: 

RodMounts warranties our product against defects in materials or workmanship for one year from the date 

of purchase.  This warranty applies to the original purchaser; proof of purchase is required.  This warranty

speci

fi

cally excludes damage caused by failure to follow instructions, misuse, abuse, improper storage

or use in a commercial application. No warranty of merchantability or 

fi

tness for a particular purpose is made.

 In the event of a claim against this warranty, the manufacturer’s obligation, and the claimant’s sole remedy,

shall be replacement of the product, repair or refund of the original purchase price, at RodMounts’ option.

Disclaimer: 

Handling, storage and use of this product by the buyer or user are beyond the control of RodMounts.  

Risks such as ine

ff

ectiveness or other unintended consequences resulting from, but not limited to, failure 

to follow instructions will be assumed by the buyer or user.  In no case will RodMounts be held liable for 

consequential, special or indirect damages resulting from the improper handling, storage or use of this 

product.

www.rodmounts.com

PO Box 8105, Bend, Oregon 97708 USA

[email protected]

ROD-UP is a trademark of RODMOUNTS

Copyright 2016

Содержание ROD-UP RUPC











Отзывы: