MACHINE SPECIFICATIONS
This sawing machine is designed and intended for
the professional contractor. The machine is
equipped with a saw head which moves horizon-
tally along a guiding beam. The material to be cut
is positioned on the saw table. The saw must be
fed through the material. Through continuous sup-
ply of cooling water the cutting quality is improved
as well as the wear on the saw blade is mini-
mized. The cooling water also absorbs the saw
dust. The quality and construction of this sawing
machine meet the highest standards. The design is
based on longevity and minimal maintenance.
The stainless steel construction contributes to a
stable, rigid and durable sawing machine. The
detachable legs are to be installed in the leg
sockets at the underside of the water container and
fastened with the knobs.
Cutting Head
The cutting head is constructed of cast alloy com-
ponents. The height adjustment is kept in balance
with a spring. A knob secures the cutting head at
the desired height.
Blade Guard
The Blade Guard is a welded steel plate cap.
Saw spindle
The spindle flange is mounted on the saw spindle.
The saw flange is to be mounted on the saw spin-
dle with a hexagon nut to clamp the saw blade.
Cutting table
The cutting table is constructed of welded stainless
steel components, equipped with anti-slip rubber
and adjustable side stop.
Cooling system
The electrical water pump is switched on simulta-
neously with the saw motor and supplies cooling
water to both sides of the saw blade. A drain hole,
with a plug, is located in the water container. Mud
flaps prevent most of the water mist and make sure
most water flows back in the water container.
Technical Data:
Type ......................................Rodia 3515RS
Motor. ................................................. 3 HP
Blade diameter/Arbor ......................14" / 1”
Cutting height .................................. max. 4”
Saw spindle speed .......................3.360 RPM
Cutting length .........................................60”
Length ...................................................48”
Width ............................................17 3/4”
Height (without legs) .........................25 1/2”
Weight ........................................... 300 lbs
Noise level ....................................80 dB (A)
Noise level during sawing ................90 dB (A)
RODIA 3515RS OPERATING MANUAL V11/2006R1
PAGE 11
Water Pump
Saw Spindle
Cutting Table
Detachable Legs
Blade Guard
