RODEX RDX712, Инструкция по эксплуатации

Страница: 17 / 42

17
RECOMMENDED CLEANING PROCEDURE
Dissolve dirt by applying detergent with the fan jet to the dry surface. On vertical surfaces, work
from the bottom upwards. Leave the detergent to act for 1 to 2 minutes, but do not allow to dry
out. Apply the high from the surface, working from the bottom upwards.
Avoid allowing the rinsing water to run on to unwanted
surfaces. STORAGE (FIG.12 – FIG. 15)
Switch off the washer. Turn off the water supply tap.
After use, the detergent residuals should be removed from the tank.
Discharge residual pressure by pressing the trigger until no more water comes out of the
lance nozzle.
Engage the gun safety
lock. Remove the plug
from the socket.
Operate the washer with non-corrosive/ non-toxic antifreeze before storing for the winter.
WARNING: BEFORE REUSING, COMPLETELY FLUSH THE UNIT OUT WITH PLAIN
Before working on the washer, disconnect the plug from the power supply socket. To ensure
good performance, check and clean the suction and detergent filters after every 50 hours of
operation FIG. 12. Clean the nozzle with the tool provided. Remove the lance from the gun, FIG.
13, remove any dirt from the nozzle hole (FIG. 14) and rinse. Follow the instructions. If the
machine has problem, it should be repair and checked in
RODEX Service.