MINIMUM
64mm
(2.5”)
25mm
(1”)
22mm (7/8”) OR
25mm (1”)
Mounting via the Desk Insert
You will need to drill a hole into your work desk for this mounting options and
therefore will require the tools to do so.
1- Take the time to choose the best location for your new studio arm. Try different
positions using the desk clamp fi rst so you are comfortable with the location you
have chosen. You should also refer to your microphones user manual for details
on the correct relationship between microphone and user.
2- Mark the location you wish to position the desk insert and check that it meets
the minimum and maximum recommended distances (refer to illustration)
3- Use either a 7/8” or 1” hole cutter and drill out a hole in the location you have
marked.
4- Remove the nut from the desk insert and drop it into the hole you have just
made.
5- Replace the nut onto the desk insert from the underside of the table and tighten
it up against the table.
6- Test that you have tighten the desk insert securely to the table so that it does not
move.
7- Insert the arm into the hole in the top of the desk insert. You are now ready to
attach your microphone.
STEP 1 & 2
STEP 3 & 4
STEP 5
STEP 6
RØDE Microphones
International:
107 Carnarvon Street
Silverwater NSW 2128 Australia
Ph:
+61 2 9648 5855
Fax: +61 2 9648 2455
USA:
P.O. Box 4189
Santa Barbara, CA 93140-4189
Ph:
805-566-7777 (toll free in the US)
Fax: 805-566-0071
www.rodemic.com
