RODE Microphones PODCASTER, Инструкция по эксплуатации

Страница: 15 / 18

USB MICROPHONE
USB MICROPHONE
USB MICROPHONE
USB MICROPHONE
1
Mounting your Podcaster
The Podcaster comes with a stand mount that will allow you to
connect it to a microphone stand or ‘anglepoise
®
style’ arm.
The mount comes with a 3/8” brass insert that can be removed.
Once removed the internal thread of the mount is a 5/8” thread.
This allows the mount to be used on either a US 5/8” stand or
pole or a Euro 3/8” stand or pole.
Also on the mount is a thumb screw which when loosened will
allow the mount to rotate to enable you to angle your microphone
to the most appropriate direction.
To mount the microphone into the clip follow the steps below.
1. Remove the locking collar from the base of the microphone.
2. Slide the base of the microphone into the hole in the stand
mount (figure 8).
3. Screw the locking collar back into position and carefully secure
the Podcaster to the mount (figure 9).
4. Now, loosen the thumbscrew on the stand mount and adjust
the microphone to the desired angle. Once set, tighten the
thumbscrew to secure the microphone in place.
Fig. 8
Fig. 9