WP30P / WP50P / WP75P / WP100P - Instructions for lifting and lowering the table
www.rodcraft.com
Page 2/2
Lifting the table
•
WARNING While lifting the table, the 2
lower lock pins must remain in position.
1.
Remove the upper lock pins.
2.
Lift the table using the winch and adjust the height of the
table to allow the positionning of the lock pins in the holes.
3.
Insert the upper lock pins with the safety pins.
4.
Remove and Insert the lower lock pins to a new position.
Insert the safety pins.
5. Always
operate the winch in order to release tension
of the cables.
Caution
When using the press,
The cables must always be loose.
The cables
must not carry any load.
Lowering the table
1.
Remove and insert the 2 lower lock pins to a new
postion.
WARNING
While lowering the table, the 2
lower lock pins must remain in lock position.
2.
Apply tension on the table using the winch and remove
the upper lock pins.
3.
Lower the table using the winch and adjust the height
of the table to allow the positionning of the lock pins.
4.
Insert the upper lock pins with the safety pins.
5. Always
operate the winch in order to release tension
of the cables.
Caution
When using the press,
The cables must always be loose.
The cables
must not carry any load.
INSTRUCTIONS FOR MOVING THE TABLE
1
2
3
5
5
Caution
Never lower or lift the table with a load, the table must be free of load.
4
3
5
5
1
4
2
2