USB Communication
Protocol
UVC 1.1
Input/Output Interface
USB Interface
1 x USB 2.0: Type A
Physical Parameter
Input Voltage
5V (USB power supply)
Current
Consumption
0.27A
Operating
Temperature
-10°C ~ 40°C
Storage
Temperature
-40°C ~ 60°C
Power Consumption
1.4W
Size
118mm x 37.2mm x 30.8mm (without bracket)
Net Weight
0.093 Kg (without bracket)
MTBF
＞
30000h
6
Camera Installation
When the monitor thickness is less than or equal to 45mm, the mounting
method can be selected to mount the conference camera product on the
monitor. The specific installation is shown in the following figure:
7
Maintenance and Troubleshooting
Camera Maintenance
If the camera is not in long-term use, please disconnect the power
switch after use.
Use soft cloth or cotton paper to remove dust from the camera housing.
When cleaning the camera lens, please use dry soft cloth to wipe, if dirt
is serious, use neutral cleaner gently. Do not use strong or corrosive
detergent, lest the lens scratch, affect the image effect.
Avoid Using
The camera should avoid shooting particularly bright objects, such as
sunlight, lights, etc.
The camera should not work under unstable lighting conditions,
otherwise the image will flash.
Do not use around facilities that can transmit high-power radio waves,
such as television station or radio-transmitting station.
Troubleshooting
Image have jitter after the camera is properly connected.
1) Check whether the camera installed position be stabled.
2) Check whether have vibrating machinery or object near the camera.
8
Toxic and Harmful Substances
Part Name
Toxic or harmful substances or elements
(Pb)
(Hg)
(Cd) (CrVI) (PBB) (PBDE)
Metal x
Ο
Ο
Ο
Ο
Ο
Plastic
Ο
Ο
Ο
Ο
Ο
Ο
Glass x
Ο
Ο
Ο
Ο
Ο
Circuit board
x
Ο
Ο
Ο
Ο
Ο
Power x
Ο
Ο
Ο
Ο
Ο
Attached x
Ο
Ο
Ο
Ο
Ο
This form is compiled in accordance with SJ/T 11364.
Ο
: Indicates that the content of the hazardous substance in all
homogenized materials of the component is subject to the limit specified
in GB/T 26572.
x: Said the hazardous substance in at least one of the components
homogenized material content in excess of the GB/T 26572 limit
requirements, and there are no mature alternatives.
9
Warranty Card
If failure caused by non-human causes occurs within one year from the date
of purchase of the machine, you may enjoy the warranty service of the
product. Any of the following circumstances is not covered by the warranty:
Without disassemble, modification such as fault causes.
Use of an environment does not conform to requirements of the product.
Irresistible factors, such as fire, earthquake, lightning strike, etc.
Warranty card does not match the product number or it is altered.
User Name
User Address/Post Code
Contact Number
Product Model
Product Series
Purchasing Date
Invoice No.
Sales Department
User save, lost or not compensated
Sales Department: (seal)
079.79.1100839_V1.0