(Effective only in PELCO-D protocol).
P_P_Address: Optional items: 0 ~ 31.
(Effective only in PELCO-P protocol).
V_AddrFix: If you can change through the
serial port of infrared switch, optional items: On,
Off (When set to On, useless in 88 30 01 FF
Command).
Net Mode: Set the serial port control
networking, optional items: Serial, Paral.
Baudrate: Serial port baud rate, optional items:
2400, 4800, 9600, 38400.
5.9 RESTORE DEFAULT
Move the main menu cursor to [RESTORE
DEFAULT], and press [HOME] key enter the
restore default page, as shown in the following
figure.
RESTORE DEFAULT
Restore?
No
Change Value
[Home] OK
[Menu] Back
Restore: Confirm restore factory settings,
optional items: Yes, No.
Note: Press [HOME] button to confirm, all
parameter restore default, include IR Remote
address and VISICA address.
6
Maintenance and
Troubleshooting
Camera Maintains
⚫
If camera will not be used for a long time,
please turn off the power switch, disconnect
AC power cord of AC adaptor to the outlet.
⚫
Use soft cloth or tissue to clean the camera
cover.
⚫
Please use the soft dry cloth to clean the
lens. If the camera is very dirty, clean it with
diluted neuter detergent. Do not use any
type of solvents, which may damages the
surface.
Unqualified Application
⚫
No shooting extreme bright object for a long
period of time, such as sunlight, light
sources, etc.
⚫
No operating in unstable lighting conditions,
otherwise image will be flickering.
⚫
No operating close to powerful
electromagnetic radiation, such as TV or
radio transmitters, etc.
Troubleshooting
Image
⚫
The monitor shows no image
1) Check that the camera power supply is
connected, the voltage is normal, and the
power indicator light is always on.
2) Turn off the power switch to check whether
the camera is self-testing.
3) Check the cable of video platform and TV
whether correct connection.
