3.
Using one end of the USB “X” cable, connect it to the USB ports of your computer (or via Power Hub that is connected to your
computer) and then the other end to the USB port in the Hawker HX.
4.
When using eSATA, first, connect one end of the SATA cable to the SATA ports of your computer and then the other end to the SATA
port in the Hawker HX device, then you will then be required to connect the USB cable as #3 above.
After a few seconds, the light will turn blue and a Rocstor HD icon will show on “My Computer” folder under the Windows OS.
5.
The Hard drive is preformatted for Plug-and-Play operation. After a few seconds, a Rocstor HD icon will show on “My Computer” folder
under the Windows OS. Under the Mac OS, the Rocport HD will appear on the “Desktop.”
6.
Click (double click) on the Rocstor HD icon to access the drive.
Page \ 3
ROCSTOR
|
HAWKER HX
quick installation guide
Connecting the Drive
1.
Turn ON your computer and wait until it fully boots up to load all programs
2.
Insert the digital key (key-token) in the back of the Hawker HX for authentication First.
eSATA
USB
3.0
USB 3.0
or (2.0)
eSATA
You may also refer to the Rocstor website to view or download a full version of the Hawker HX manual. www.ROCSTOR.com