3.
Using only one interface cable at a time, select the interface port you wish to use on your computer. When using FireWire, connect one
end of the FireWire cable to the appropriate FireWire port (FW800 or FW400) of your computer and then the other end to the FireWire port
in the Eagleroc E7. When using USB, connect one end of the USB cable to the USB port of your computer (or via Power Hub that is
connected to your computer) and then the other end to the USB port in the Eagleroc E7.
NOTE:
The AC adaptor MUST BE connected first to both the hard drive and to the electricity; however, the drive will not come “ON” until the
USB interface cable is fully connected.
4.
The hard drive is preformated for Plug-and-Play operation. After a few seconds a Rocstor HD icon will show up on “My Computer” folder
under the Windows OS. Under the Mac OS, the ROCSTOR HD will appear on the “Desktop.”
5.
Click (double click) on the Rocstor HD icon to access the drive.
*You may also refer to the Rocstor website to view or download a full version of the Eagleroc E7 manual. www.ROCSTOR.com
Page \ 3
ROCSTOR
|
EAGLEROC E7
quick installation guide
Connecting the Drive
1.
Turn ON your computer and wait until it fully boots up to load all programs.
2.
Connect one end of the adaptor cord directly into the Eagleroc, and connect the other end to an AC outlet, surge protector or battery
backup (UPS).
1
USB
3.0
FireWire
800
Power
(Daisy Chain Optional)
FireWire
800 or 400
FireWire
800 or 400
or
USB 3.0
2