Connecting the Drive
4.
The Hard drive is preformatted for Plug-and-Play operation. After a few seconds a Rocstor HD icon
will show on “My Computer” folder under the Windows OS. Under the Mac OS, the Rocport HD will appear
on the “Desktop.”
5.
Click (double click) on the Rocstor HD icon to access the drive.
*You may also refer to the Rocstor website to view or download a full version of the Eagleroc E3 manual.
www.ROCSTOR.com
1.
Turn ON your computer and wait until it fully boots up to load all programs.
2.
Connect one end of the Adaptor cord directly to the Eagleroc and the other end to an AC outlet, surge
protector or battery Backup (UPS).
3.
Connect one end of the USB cable to the USB port of your computer (or via Power Hub that is
connected to your computer) and then the other end to the USB port in the Eagleroc E3.
NOTE:
The AC adaptor MUST BE connected first to both the hard drive and to electricity; however, the drive will
not come “ON” until the USB interface cable is fully connected.
ROCSTOR
|
EAGLEROC E3
quick installation guide
Page \ 3
1
USB 2.0
2
USB
Power
