GROMMET DETAIL
Position the blue strap on the
cover. Make a hole, or cross
cut through the strapping and
the cover. Ensure that the hole
in strapping is at least 2" from
the end of the strap and that
the hole in the cover is at least
2" from the end of the cover.
COVER
STRAP
WOOD
Insert female grommet (item #103) through hole in strapping and cover.
Ensure that material is completely pushed down shaft. Insert male
grommet (item #101) into female grommet. Once in place, hit with
hammer until secure. (Caution - excess force will break grommet).
COVER
101
STRAP
103
1
STRAP
Using self-tapping/drill screws
(item #1), secure strap to tube.
For odd shaped pools, pinch the cover and attach the strap as
shown. Attach the cut cover to the roller with the blue straps (see
grommet detail) by folding the cover in a straight line as shown in
the diagrams. Ensure that the fold in the cover is straight.
Attach the cut cover
to the roller with the
blue straps (See
grommet detail). En-
sure length of strap
allows cover to lay flat
on pool, to prevent
wind from getting un-
der cover.
STRAPS EVERY 3'
Open cover over the pool and set into position.
Ensure that the seams on the cover are
parallel to the roller. (This may not be possible
with some types of covers).
COVER
POOL
SEAMS
ROLLER
When cutting the cover, allow a 1"
wide border around the pool edge to
compensate for shrinkage.
Open cover over the pool and set
into position. Ensure that the end
of the cover (where it attaches to
the roller) is square to the roller.
If the cover has seams, then the
seams should be parallel to the
roller. (This may not be possible
with some types of covers.)
When cutting the cover, allow
a 1” wide border around the
pool edge to compensate for
shrinkage.
ROLLER
SEAMS
1" BORDER
COVER
FOR IRREGULAR, KIDNEY, OR ROUND SHAPED INGROUND POOLS
FOR REGULAR SHAPED INGROUND POOLS
Cover
Grommets
STRAPS EVERY 3'
Roller
Fold in
cover
Strap
1
5
13
15
19
21
25
29
55
61
69
73
101
103
105
107
109
203
211
Self-tapping Screw
5/16"x1" Bolt
3/8"x8" Anchor Bolt
Concrete Anchor
5/16" Washer
3/8" Washer
Spring
Acorn Nut
#3 A-Frame
White Knob
3" Hub
Large Handle
Male Grommet
Female Grommet
Plastic Bushing
Plastic Washer
Spring Guard
36' Strapping
4" Casters
12
2
2
2
2
8
2
4
2
12
1
10
10
2
2
2
1
4
501
505
513
515
505
21
517
523
55
533
543
547
549
549
555
555
109
5589
585
ITEM
#
DESCRIPTION
QTY.
RE-
ORDER
#
Tools Required:
Reversible Electric Drill
1/2" Concrete (masonary) Drill Bit
Hammer & Center Punch or Nail
5/16" Hex Head Socket Bit
1/2" Wrench
5/8" Wrench
Rocky’s Reel Systems Inc.
Tel: 1-800-663-8705 E-Mail:
