To order parts and supplies: 800.343.9353 >> eastwood.com
3
READ INSTRUCTIONS
• Thoroughly read and understand these product instructions before using this tool.
Failure to follow all warnings can result in tool damage or serious physical injury.
• Keep these product instructions for future reference.
EYE INJURY HAZARD!
• Rapidly rotating surfaces can eject metal particles, dirt and debris at high
velocity. Always wear ANSI approved eye protection when operating this tool.
HEARING DAMAGE HAZARD!
• This Rockwood Pneumatic Tool emits high sound levels while operating. Use ANSI
approved ear protection when operating.
BURSTING HAZARD!
• Do not exceed 90 psi (6.3 bar) of tool inlet pressure. Permanent tool damage and/
or explosion could occur and cause personal injury.
INJURY HAZARD!
• This tool uses high-speed, highly abrasive cutting surfaces which can quickly
cause injury. Keep fingers and hands away from moving parts when operating.
Wear thick, well-fitting work gloves and keep loose clothing, sleeves, cords,
jewelry and hair away from moving parts.
• This tool will eject sparks at high speed which can ignite flammable materials
or injure others nearby. Do not operate near flammable materials and keep all
persons and pets away from the work area.
• Do not force tool or exert excessive side forces on tool while in use as accessories
can bend or disintegrate causing them to fragment and eject sharp pieces at
high velocity.
• Always make sure the workpiece is securely clamped or anchored to avoid sudden
movements which could result in injury.
• Frequently inspect accessories (not included) and tool condition. If damage devel-
ops, discontinue tool use immediately and replace damaged accessory. ONLY USE
replacement 1/8” or 1/4” shank accessories rated for 22,000 RPM or greater use,
otherwise severe injury or death can result in the event of accessory failure.
• Always disconnect tool from air supply when changing accessories to prevent
accidental tool starting and potential severe injury.
VIBRATION INJURY HAZARD!
• This tool will vibrate during use! Repeated exposure to vibration may cause
physical injury.
