Rockwell ShopSeries RS8137, Руководство пользователя

Страница: 11 / 16

11
2400PSI PETROL HIGH PRESSURE WASHER EN
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
1. ASSEMBLY
WARNING: Always wear safety goggles
or safety glasses with side shields when
operating tools. Failure to do so could result in
objects being thrown into your eyes causing possible
serious injury.
WARNING: Always stop the engine during the
assembly.
2. UNPACK
Unpack all of that supplied equipment on a clean flat
surface.
Compare and match the accessories and contents of
the box to the main picture included in the manual.
If you find that parts are missing or damaged, do not
use the product and contact your dealer. The use of
incomplete or damaged products is a potential hazard
to people and property
3. To prepare your pressure washer for operation,
you will need to perform these tasks:
1) Attach handle to main unit.
2) Add oil to engine crankcase.
3) Add fuel to fuel tank.
4) Connect high pressure hose to trigger gun and
pump.
5) Connect water supply to pump.
6) Attach nozzle extension to trigger gun.
7) Select/attach quick connect nozzle to nozzle
extension.
4. HANDLE ASSEMBLY(See Fig. A1& A2)
Insert the handle to the handle supports (a) of the
high pressure washer. Fix it by using the two screws
(18) for handle .
5. ADD ENGINE OIL
CAUTION! The following procedures and
adjustments must be performed before the
engine is started. Do not attempt to make any of these
adjustments with the engine is running.
1) OIL TYPE
Always use good-quality engine oil which classified
SAE 30 oil. Never use additives with recommended
oil.
To prolong the life of your engine it is important that
the oil is changed after the first 5 hours of use - refer
to “Maintenance”.
2) FILLING WITH ENGINE OIL (See Fig. B1&B2)
CAUTION! To prevent engine damage the
engine is shipped without oil or petrol. The
engine must be filled with the correct grade of oil and
petrol before starting the engine.
Check the engine oil level with the engine stopped
and the washer on a level surface.
a) Unscrew and remove the oil dipstick (b).
b) Gradually add good-quality engine oil. Check
the oil level frequently while filling. Wipe the oil
dipstick clean; refit and tighten the filler cap and
then remove it again.
The oil level must between the “Min” and “Max”
marks on the dipstick. Do not overfill.
c) Wipe spilled oil with a soft cloth and reattach the
oil tank cap.
NOTE: Running the engine with a low oil level will
cause engine damage. Recommend use high
detergent, premium quality 4-stroke engine oil. Use
non-detergent oil can shorten the engine’s service
life and using 2-stroke oil will damage the engine.
Do not overfill. Wipe away any spilt oil.
6. ADD FUEL
1) FUEL TYPE
Always use clean, fresh unleaded petrol. Purchase
fuel in quantities that can be used within 30 days.
Never mix oil with petrol.
Fill to base of neck to allow for fuel expansion. Do not
overfill the fuel tank.
2) FILLING WITH FUEL
WARNING: Petrol is highly inflammable and
extreme precaution must be taken when
handling or working with it. Keep out of reach of
children.
WARNING: This product is not supplied with
fuel.
Before operation, it is essential to fill it with proper oil.
a) Unscrew and remove the fuel tank cap (7).
b) Add fuel until fuel level remains a minimum 5mm
of space between top of the fuel and the inside
edge of the tank to allow for expansion. Do not
overfill.
c) Wipe any spilled fuel with a soft cloth and tighten
the fuel tank cap.
d) Refuel in a well-ventilated area with the engine
stopped. Do not smoke or allow flames or sparks
in the area where the engine the engine is refueled