Rockwell ShopSeries RS4900, Руководство пользователя

Страница: 6 / 12

6
1200W Car Polisher eN
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
3. PeRSoNal SafeTy
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. ensure the
switch is in the off-position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) do not overreach. keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f) dress properly. do not wear loose clothing or
jewellery. keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g) if devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust-related hazards.
4. PoWeR Tool uSe aNd CaRe
a) do not force the power tool. use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which it
was designed.
b) do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. if damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) use the power tool, accessories and tool bits etc.
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
5. SeRViCe
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
addiTioNal SafeTy iNSTRuCTioNS
foR youR CaR PoliSheR
1. Check that speed marked on the wheel is equal to or
greater than the rated speed of the polisher.
2. Inspect the sponge pad before use. Do not use
chipped, cracked or otherwise defective products.
3. Ensure that the bonnets are fitted in accordance
with the manufacturer’s instructions.
4. Ensure that the bonnet is correctly mounted and
tightened before use and run the tool at no-load for
30 seconds in a safe position. Stop immediately if