Rockwell ShopSeries RS2319 Скачать руководство пользователя страница 10

10

18V CORDLESS ANGLE GRINDER 

EN

during charging. Do not overcharge any batteries. 

Ensure that batteries and chargers are not left 

unsupervised during charging. 

18. Do not recharge non-rechargeable batteries, as they 

can overheat and break.

19. Longer life and better performance can be 

obtained if the battery pack is charged when the 

air temperature is between 18

o

C and 24

o

C. Do not 

charge the battery pack in air temperatures below 

4.5

o

C, or above 40.5

o

C. This is important as it can 

prevent serious damage to the battery pack.

20. Charge only battery pack of the same model 

provided by ROCKWELL and of models 

recommended by ROCKWELL.

Safety Warnings for battery pack 

a)  Do not dismantle, open or shred cells or battery 

pack. 

b)  Do not short-circuit a battery pack. Do not store 

battery packs haphazardly in a box or drawer 

where they may short-circuit each other or be 

short-circuited by conductive materials. 

When 

battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can make 

a connection from one terminal to another. Shorting 

the battery terminals together may cause burns or a 

fire.

c)  Do not expose battery pack to heat or fire. Avoid 

storage in direct sunlight.

d)  Do not subject battery pack to mechanical shock.

e)  In the event of battery leaking, do not allow the 

liquid to come into contact with the skin or eyes. 

If contact has been made, wash the affected area 

with copious amounts of water and seek medical 

advice.

f)  Seek medical advice immediately if a cell or 

battery pack has been swallowed.

g)  Keep battery pack clean and dry.

h)  Wipe the battery pack terminals with a clean dry 

cloth if they become dirty.

i)  Battery pack needs to be charged before use. 

Always refer to this instruction and use the 

correct charging procedure.

j)  Do not maintain battery pack on charge when not 

in use.

k)  After extended periods of storage, it may 

be necessary to charge and discharge the 

battery pack several times to obtain maximum 

performance.

l)  Battery pack gives its best performance when it is 

operated at normal room temperature (20°C ± 5°C).

m)  When disposing of battery packs, keep battery 

packs of different electrochemical systems 

separate from each other.

n)  Recharge only with the charger specified by 

ROCKWELL Do not use any charger other than that 

specifically provided for use with the equipment. 

A charger that is suitable for one type of battery 

pack may create a risk of fire when used with 

another battery pack. 

o)  Do not use any battery pack which is not designed 

for use with the equipment.

p)  Keep battery pack out of the reach of children.

q)  Retain the original product literature for future 

reference.

r)  Remove the battery from the equipment when not 

in use.

s)  Dispose of properly.

Содержание ShopSeries RS2319

















Отзывы: