Rockwell RG8259.9, Руководство пользователя

Страница: 14 / 16

14
18V POLE HEDGE TRIMMER EN
ADJUSTING THE MACHINE HEAD TO THE REQUIRED ANGLE
(See Fig H1-H6)
Push the lock button (3) of the machine head and then
rotate the machine head (2) to the desired position.
Release the lock button (3) again and check whether
the button is locked in place. (See Fig. H1)
NOTE: The Machine head can be locked on 5
positions. (-30
o
, 0
o
, 30
o
, 60
o
, 90
o
)
(See Fig. H2-H6)
OPERATING THE POLE HEDGE TRIMMER (See Fig I1, I2, I3)
Always hold the trimmer with both hands and with the
blade away from you before turning it on.
When trimming new growth, use a wide sweeping
action so that the stems are fed directly into the blade.
Allow the cutting blades to reach full speed before
cutting. When operating, keep the cutting blades away
from people and objects such as walls, large stones,
trees, vehicles, etc.
If the blade stalls, immediately stop the trimmer.
Release the switch before attempting to clear jammed
debris from the cutting blades.
Do not attempt to cut stems that are too thick for the
cutting blade.
MAINTENANCE AND STORE
Warning! Always remove the plug from the electrical
socket before cleaning or repair.
1) Never use water to clean the unit.
2) Always clean the pole hedge trimmer immediately
after use. Brush the blade using a stiff nylon
brush to remove any debris.
3) Always store the unit in a dry place.
4) Inspect the hedge trimmer before each use.
5) Have the unit professionally repaired if any
damage occurs.
6) The blade rail should be cleaned and treated with
fine oil after each use.
7) Use the blade guard for transportation and storage.