Rockwell RD4059, Руководство пользователя, Страница: 7 / 12

7
135W PALM SANDER EN
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Warning
RCM marking
ABN: Australian Business Number. By this number,
business information such as entity type, status,
business location etc. can be found at website http://
abr.business.gov.au.
ABN of Positec Australia Pty Ltd is 14 101 682 357
TECHNICAL DATA
Voltage 220-240 V~ 50 Hz
Power input 135W
No load speed 12000/min
Diameter of base 140*140*80mm
Orbital dia 1.0 mm
Protection class
/II
Machine weight 0.97kg
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
Intended Use
The machine is intended for dry sanding of wood,
plastic, filler and coated surfaces.
1. FITTING THE SANDING PAPER (SEE FIG A)
FIT THE SANDING PAPER
This sander features an easy hook and loop accessory
fastening system for quick changing without clamps.
The sanding papers are placed directly onto the base
plate. The hole pattern in the base plate and sanding
paper must match. Then press the sanding paper
onto the base plate by hand. Firmly press the power
tool with the sanding paper against a flat surface and
briefly switch the power tool on. This provides for good
adhesion and prevents premature wear
Before placing on the sanding paper, free the base
plate from dust/debris by lightly tapping against it.
REMOVE THE SANDING PAPER
Simply lift a small portion of the sand paper from the side
then pull it off the sanding pad.
2.USING THE Dust Collection BOX (SEE FIG B)
A) ATTACH THE Dust Collection BOX
Your sander is equipped with a Dust Collection Box (5).
Insert the Dust Collection Box into the rear dust outlet of
sander. Then pull the Dust Collection Box and make sure
it is tightened securely on the dust outlet. (See Fig B)
B) EMPTY THE Dust Collection BOX
For more efficient operation,empty the dust collection
box every 5-10 minutes.This will permit the air to flow
through the box better.
To empty the Dust Collection Box, pull off the Dust
Collection Box out of the dust extraction outlet directly
and shake out dust.
3. USING THE DUST OUTLET (SEE FIG C)
Your sander is equipped with a 35mm dust outlet, which
is designed for connecting the hose of a vacuum cleaner.
If the vacuum hose is 35mm, insert the hose directly into
the rear dust outlet of the sander.
Note: When using this feature you must switch on the
vacuum cleaner followed by the sander. When work
is completed turn off the sander first followed by the
vacuum.