Rockwell Automation PowerFlex 755 Drive, Руководство пользователя

Страница: 55 / 232

Configuring the I/O 4-15
PowerFlex® 755 Drive Embedded EtherNet/IP Adapter User Manual
Publication 750COM-UM001A-EN-P
To match the Datalinks in the drive to the project I/O configuration,
click Use Project. After the datalinks have been matched, the Input
Data and Output Data columns are grayed out. Click Continue.
A series of download dialog boxes appear, which may take a minute
to complete. Thereafter, the I/O OK box in the upper-left of the
RSLogix 5000 window should now be solid green and the yellow
warning symbols in the treeview under the I/O Configuration folder
and drive profile should be gone.
4. Click OK to close the Module Properties screen for the drive.
Using the RSLogix 5000 Generic Profile (all versions)
The basic RSLogix 5000 Generic Profile is only recommended when:
•
A specific drive profile in other versions of RSLogix 5000 is
unavailable.
•
Users are already familiar with a Generic Profile and do not want to
convert an existing project to an Add-On Drive Profile (v16 or
higher).
•
A project must maintain specific revision level control.
•
Version 16 Only — The controller cannot be taken offline. Version
16 enables the Generic Profile to be added while the controller is
online and in the Run mode.
Adding the Drive/Adapter to the I/O Configuration
To transmit data between the bridge and the drive, you must add the
drive as a child device to the parent bridge.
1. In the treeview, right-click on the bridge and select New Module…
to display the Select Module screen ( Figure 4.19 ). In our example,
we right-click on the 1756-ENBT/A bridge. Expand the
Communications group to display all of the available
communication modules.
Figure 4.19 Select Module Screen