10
Publication SAFETY-AT010A-EN-P – January 2008
Publication SAFETY-AT010A-EN-P – January 2008
13.
Click Change Mode.
14.
Select Execute.
15.
Click OK to change modes.
Programming
Programming for this setup includes programming the MicroLogix 1100
controller to message to the SmartGuard 600 EtherNet/IP target I/O
assemblies.
Programming the MicroLogix 1100 Controller
Follow these steps to program the MicroLogix 1100 controller.
1.
Launch RSLogix 500 software.
2.
Open a new file.
3.
Select the controller.
Publication SAFETY-AT020A-EN-P – October 2008
