Rockwell Automation Guardmaster 440R-ENETR, Руководство пользователя, Страница: 34 / 86

34 Rockwell Automation Publication 440R-UM009C-EN-P - July 2019
Chapter 5 Add the AOP to a Studio 5000 Project
4.
Click OK.
Figure 37 - Upload Complete
5.
Expand the Relay Bus and confirm the number of relays and type of relay is
correct for each slot ( Figure 38 ).
6.
Expand the DG relay (440R-DG2R2T) and confirm how many
GuardLink circuits are used. In this example, a GuardLink circuit is used
on input 1. Input 2 is a standard dual channel circuit.
7. Expand the GuardLink circuit and confirm the number of taps and types
of taps are correct for each location.
8. Click OK.
Figure 38 - Confirm the Configuration
9. Click Yes to confirm the change to the module definition ( Figure 39 ).
Figure 39 - Confirm Module Definition Change
Figure 40 on page 35 shows the results of the setup.