Rockwell Automation Publication KNX-TD005A-EN-P - October 2021
165
Kinetix 3, 300, 350, 2000, 6000, 6200, 6500, 7000 Servo Drives Specifications Technical Data
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
You can view or download publications at
.
Resource
Description
Kinetix Rotary Motion Specifications Technical Data, publication
Product specifications for Kinetix VPL, VPC, VPF, VPH, and VPS; Kinetix MPL, MPM, MPF, and MPS;
Kinetix TLY and TL; Kinetix HPK; and Kinetix MMA rotary motors.
Kinetix Linear Motion Specifications Technical Data, publication
Product specifications for Kinetix MPAS and MPMA linear stages, Kinetix MPAR and MPAI electric
cylinders, and Kinetix LDC and LDL linear motors.
Kinetix 5700, 5500, 5300, and 5100 Servo Drives Specifications,
publication
Provides product specifications for Kinetix Integrated Motion over the EtherNet/IP™ network and
EtherNet/IP networking servo drive families.
Kinetix Rotary and Linear Motion Cable Specifications Technical Data,
publication
Product specifications for Kinetix 2090 motor and interface cables.
Kinetix Servo Drive Performance Specifications per Ecodesign Regulation (EU)
2019/1781 technical data, publication
Provides energy efficiency performance data for Rockwell Automation Kinetix Servo drives. This
data supports IE2 compliance of Kinetix Servo drives per EU 2019/1781.
1321 Power Conditioning Products Technical Data, publication
Information on typical use cases, specifications, terminations, and dimensions.
Motor Protection Circuit Breaker and Motor Circuit Protector Specifications,
publication
Provides specifications for Bulletin 140M Motor Protection Circuit Breaker and Motor Circuit Protector.
Motor Protection Circuit Breaker and Motor Circuit Protector Specifications,
publication
Provides specifications for Bulletin 140MP, 140MT, and 140M Motor Protection Circuit Breaker and
Motor Circuit Protector.
Kinetix 6000 and Kinetix 6200/6500 Drive Systems Design Guide,
publication
System design guide to determine and select the required (drive specific) drive module, power
accessory, connector kit, motor cable, and interface cable catalog numbers for your drive and
motor/actuator motion control system. Included are system performance specifications and
torque/speed curves (rotary motion) and force/velocity curves (linear motion) for your motion
application.
Kinetix 300/350 Drive Systems Design Guide, publication
Kinetix 3 Drive Systems Design Guide, publication
Kinetix 2000 Drive Systems Design Guide, publication
Kinetix 7000 Drive Systems Design Guide, publication
Kinetix Motion Control Selection Guide, publication
Overview of Kinetix servo drives, motors, actuators, and motion accessories designed to help
make initial decisions for the motion control products best suited for your system requirements.
System Design for Control of Electrical Noise Reference Manual,
publication
Information, examples, and techniques designed to minimize system failures caused by
electrical noise.
Servo Drive Installation Best Practices Application Technique,
publication
Best practice examples to help reduce the number of potential noise or electromagnetic
interference (EMI) sources in your system and to make sure that the noise sensitive components
are not affected by the remaining noise.
ControlLogix Selection Guide, publication
Information to determine which ControlLogix controller fits your application and the product
specifications to help design a ControlLogix system and select the appropriate components.
CompactLogix Selection Guide, publication
Information to determine which CompactLogix controller fits your application and the product
specifications to help design a CompactLogix system and select the appropriate components.
Industrial Ethernet Media Brochure, publication
Information to determine which Bulletin 1585 Ethernet cable fits your application and the product
specifications to help select the appropriate components.
EtherNet/IP Network Devices User Manual,
Describes how to configure and use EtherNet/IP devices to communicate on the EtherNet/IP
network.
Ethernet Reference Manual,
Describes basic Ethernet concepts, infrastructure components, and infrastructure features.
Safety Guidelines for the Application, Installation, and Maintenance of
Solid-state Control, publication
Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides
general guidelines for the application, installation, and maintenance of solid-state control in
the form of individual devices or packaged assemblies incorporating solid-state
components.
Industrial Automation Wiring and Grounding Guidelines, publication
Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website,
Provides declarations of conformity, certificates, and other certification details.