Rockwell Automation Allen-Bradley TLP-SSN-F046 Скачать руководство пользователя страница 8

Allen-Bradley, Kinetix, MP-Series, Rockwell Automation, Rockwell Software, and TL-Series are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400

Rockwell Automation maintains current product environmental information on its website at

http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page

.

Publication 2090-IN044B-EN-P - September 2019

Supersedes Publication 2090-IN044A-EN-P - September 2019

Copyright © 2019 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

5014099301-QO01 

*QO01* 

Rockwell Automation Support

Use the following resources to access support information.

Documentation Feedback

Your comments will help us serve your documentation needs better. If you have any suggestions 
on how to improve this document, complete the How Are We Doing? form at 

http://

literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf

.

Technical Support 
Center

Knowledgebase Articles, 
How-to Videos, FAQs, Chat, 
User Forums, and Product 
Notification Updates.

https://rockwellautomation.custhelp.com/

 

Local Technical 
Support Phone 
Numbers

Locate the phone number 
for your country.

http://www.rockwellautomation.com/global/support/get-support-
now.page

 

Direct Dial Codes

Find the Direct Dial Code 
for your product. Use the 
code to route your call 
directly to a technical 
support engineer.

http://www.rockwellautomation.com/global/support/direct-dial.page

 

Literature Library

Installation Instructions, 
Manuals, Brochures, and 
Technical Data.

http://www.rockwellautomation.com/global/literature-library/
overview.page

 

Product 
Compatibility and 
Download Center 
(PCDC)

Get help determining how 
products interact, check 
features and capabilities, 
and find associated 
firmware.

http://www.rockwellautomation.com/global/support/pcdc.page

 

Содержание Allen-Bradley TLP-SSN-F046









Отзывы: