manualshive.com logo in svg

Rockwell Automation Allen-Bradley SMC Dialog Plus, Быстрый старт

Поделиться
Скачать
Rockwell Automation Allen-Bradley SMC Dialog Plus Скачать руководство пользователя страница 11

Rockwell Automation Publication  150-QS002B-EN-P - October 2011

11

        

Quick Start

Programming

The SMC Dialog Plus controller can be programmed with the built-in keypad 
and LCD display or with the optional Bulletin 1201 human interface modules. 
Parameters are organized in a four-level menu structure and divided into 
programming groups.

Keypad Description

Escape

Pressing the 

Escape

 key causes the programming system to move up 

one level in the menu structure.

Select

The 

Select

 key has two functions:

•

 Pressing the 

Select

 key alternately causes the top or bottom line of 

the display to become active (indicated by flashing first character). 

•

 In parameter modification with series A FRN 3.00 or greater and 
series B human interface modules, 

Select

 moves the cursor from 

the least significant digit to the most significant.

Up/Down 

Arrows

These keys are used to increment and decrement a parameter value or 
to scroll through the different modes, groups, and parameters.

Enter

When pressed, a mode or group will be selected, or a parameter 
value will be entered into memory. After a parameter value has been 
entered into memory, the top line of the display will automatically 
become active, allowing the user to scroll to the next parameter.

ESC

SEL

Содержание Allen-Bradley SMC Dialog Plus





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды