Rockwell Automation Allen-Bradley PanelView 5510 Series, Руководство пользователя

Страница: 102 / 112

102 Rockwell Automation Publication 2715P-UM001C-EN-P - March 2019
Chapter 7 Troubleshooting
Clean the Display A protective overlay can help extend the life of the terminal and make it easier to
clean the display.
Table 4 on page 17 provides catalog numbers for overlays.
To clean the display, follow these steps.
1. Disconnect power from the terminal at the power source.
2.
To clean the display and help prevent scratches, use a clean sponge or soft
cloth with mild soap or detergent.
3. Dry the display with a chamois or moist cellulose sponge to avoid water
spots.
Remove Paint and Grease
To remove paint or grease from the bezel that is properly mounted in a NEMA,
UL Type, or IP rated enclosure, follow these steps.
1. Rub lightly with isopropyl alcohol (70% concentration).
2. To remove residue, use a mild soap or detergent solution.
3. Rinse with clean water.
Equipment Wash Downs
Ship the Terminal If you ship the enclosure with the terminal installed, make sure that the terminal
is properly secured and guarded against damage from impact, sharp objects, or
abrasive materials.
ATTENTION: Do not use abrasive cleaners or solvents, they can damage the
display. Do not scrub or use brushes.
Do not apply cleaning solution directly on the terminal screen, the solution can
drip or seep onto the gasket. Apply cleaning solution to a clean sponge or soft
cloth, and gently wipe the screen to remove the dirt and grime.
ATTENTION: Cleaning a display while power is applied can result in
unintended activation of screen items.
ATTENTION: Do not use a high-pressure washer for cleaning the front bezel
of the terminal. A high-pressure washer can damage the terminal.
Do not use a high-pressure washer for cleaning vented enclosures. Water can
enter the enclosure and damage the terminal and other equipment.
ATTENTION: Rockwell Automation is not responsible for damage to a
product that is shipped or transported while installed in a panel or enclosure.