Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, Руководство пользователя

Страница: 43 / 104

Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019 43
Install and Operate the Junction Boxes Chapter 4
Figure 8 - 2711T-JBIP65DC1 Junction Box Cable Outlets (with cover plate removed)
9.
Before you reinstall the junction box to its back plate, consider how you
plan to use the junction box with a second generation MobileView
terminal.
10.
After you perform any suggestions in step 9 , use a Torx 10 screwdriver and
the six screws to reinstall the junction box to its cover plate.
Table 5 - Cable Outlet Descriptions
Item
No.
Cable Outlet
Description Gland
Size
Cable Dia.
Range
Protection
Class
1 Standard M16 x 1.5 4…10 mm
(0.16…0.4 in.)
IP68
2 Standard
3 Ethernet M20 x 1.5 3…6 mm
(0.12…0.24 in.)
IP66
4 Ethernet
5 Standard M16 x 1.5 4…10 mm
(0.16…0.4 in.)
IP68
6 Standard
1
2
6
5
3 4
Black Plug
Cable Gland
1
2 3 5 4
6
If Then
You plan to use a second generation MobileView
terminal that does not have Box ID functionality You must activate a DIP switch; see DIP Switch on
page 46 .
You plan to use a second generation MobileView
terminal with Box ID functionality with multiple
IP65 junction boxes You can assign an identification (ID) number for each
junction box specific to its application; see
Box ID
Functionality on page 47 .
You want to adjust the brightness of the
illuminated E-stop button on a second generation
MobileView terminal You can press an adjustment button for four possible
brightness levels; see
Illuminated E-stop Button
Brightness on page 47 .