12
Rockwell Automation Publication 1608M-IN002A-EN-P - January 2016
MegaDySC Dynamic Voltage Sag Corrector
RS-232 Serial communication
A DE-9 male connector is provided for remote communication. Contact Rockwell Automation Technical Support for protocol details.
Figure 8 - Serial Communication Port and MegaDySC Status Relay Contacts
i-Sense Voltage Monitor Communication
The i-Sense voltage monitor is on the bottom front of the bypass switchboard and is pre-wired to monitor the MegaDySC input and output
voltages. The i-Sense Ethernet and Modem communication ports are internally connected to the RJ45 and RJ11 jacks, respectively, in the upper
compartment of the bypass switchboard. See
for conduit entry locations. A communication connection is required to enable i-
Sense monitoring. See publication 1608S-UM001 for more information.
Figure 9 - Communication Conduit Entrance view from within upper switchboard compartment
MDFNVDFFHVVIURPDERYH
RSWLRQDO7%
&RQGXLWHQWU\IRU
&RQGXLWHQWU\IRU
L6HQVH&RPPXQLFDWLRQV
L6HQVHFRPPXQLFDWLRQV
7%
