Rockwell Automation Allen-Bradley G Series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 56

background image

Rockwell Automation Publication 1502-UM060A-EN-P - October 2020

7

Chapter

1

Product Description

Contactor Description

The Allen-Bradley® Bulletin 1502 450 A vacuum contactors are designed for
applications in the 2400…7200V AC range. The contactor is suitable for all
types of loads, for example: three-phase motors, transformers, power
capacitors, and resistive heating loads.

The contactor uses three interrupters (referred to as vacuum bottles) operated
by an electromagnet assembly through a mechanical linkage. They are
resistant to most adverse atmospheric conditions and provide long mechanical
and electrical life.

The contactors are used in various motor control and adjustable speed drive
configurations, such as full-voltage non-reversing, full-voltage reversing, two-
speed, reduced voltage, synchronous, adjustable speed drive input/output, and
bypass applications. They are fixed-mounted within the structures and the line
and load terminations are made at the rear of the device. The main contactor
should be mechanically interlocked with the external isolation switch
operating handle and the isolation switch as well.

Bulletin 1502 vacuum contactors are optimized for use with the IntelliVAC™
control module (see publication

). Certain contactor models are

available for use with electromechanical (relay) control panels. There are physical
control wiring and component differences between contactors that are designed
for IntelliVAC control versus those intended to be operated using
electromechanical relay controls (see

Catalog Number Explanation on page 12

Series Letter Details

The series letter of the Bulletin 1502 contactor is shown on the label that is
located on the front of the armature plate (

). The catalog number,

along with the series letter, define the product’s electrical and mechanical
configuration. This information must be used to select the appropriate repair
or replacement parts.

Electrically held, electromechanical relay controlled contactors moved from
Series D to Series E with the inclusion of mechanical vacuum bottle braces.

Mechanically latched, electromechanical relay controlled contactors were
moved from Series E to Series F with the inclusion of mechanical vacuum
bottle braces.

Electrically held and mechanically latched IntelliVAC controlled contactors
were moved from Series E to Series F with the inclusion of mechanical vacuum
bottle braces.

«
...
5
6
7
8
9
...
»

Содержание Allen-Bradley G Series

























































Отзывы:

Нет отзывов

Похожие инструкции для Allen-Bradley G Series

FEPL-02 Ethernet POWERLINK

Бренд: ABB Страницы: 2

Бренд: ABB Страницы: 2

Бренд: Balboa Instruments Страницы: 10

Бренд: Quantum Data Страницы: 36

Concord express

Бренд: GE Страницы: 3

Бренд: Eaton Страницы: 166

Бренд: Canarm Страницы: 3

Бренд: Danfoss Страницы: 85

VLT Decentral FCD 300

Бренд: Danfoss Страницы: 112

Бренд: Danfoss Страницы: 4

VLT 6000 series

Бренд: Danfoss Страницы: 27

Бренд: Danfoss Страницы: 16

Бренд: Danfoss Страницы: 20

ADAP-KOOL AK-PC 781

Бренд: Danfoss Страницы: 14

Бренд: Danfoss Страницы: 12

Бренд: Danfoss Страницы: 12

vlt soft starter mcd 500

Бренд: Danfoss Страницы: 96

vlt soft starter mcd 500

Бренд: Danfoss Страницы: 95

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды