Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,, Руководство пользователя

Страница: 20 / 78

20 Rockwell Automation Publication 6181X-UM002A-EN-P - October 2017
Chapter 2 Install the Computer
• When mounted, the computer cannot be tilted from vertical.
Mounting Clearance
Requirements
Figure 2 - Minimum Clearances (display model shown)
Display Computer Non-display Computer
Top
Bottom (I/O ports)
Top
Bottom (I/O ports)
Vertical (0° tilt) Vertical (0° tilt)
IMPORTANT Because of self-heating, do not operate the computer in an enclosure by
using the minimum clearances unless adequate ventilation or other
methods are used to lower the temperature within the enclosure.
Allow enough clearance to install or remove peripheral components, such as
internal drives.
The minimum required enclosure size (HxWxD) is 403 x 497 x 154 mm
(15.87 x 19.57 x 6.06 in.).
Right and left are based on facing a computer from inside an enclosure.
Item Description Clearance, min
1 Top 50 mm (2 in.)
2 Right (for airflow) 50 mm (2 in.)
3 Rear 50 mm (2 in.)
4 Left (for airflow and drive access) 127 mm (5 in.)
5 Bottom (for I/O port access and ventilation) 102 mm (4 in.)
4
5
3
1
2
Air Flow Direction