Rockwell Automation Allen-Bradley 6180P-12BPXP, Руководство пользователя

Страница: 46 / 68

46 Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014
Chapter 4 Component Replacement
5. Insert the new battery with the positive polarity (+ side) facing up, and
make sure that it is seated completely.
6. Reinstall the computer cover as detailed in Reinstall the Cover on page 36 .
7. Follow the steps for Post-configuration on page 35 .
8. During POST, press F2 to enter the BIOS setup and reconfigure settings.
Backlight Assembly Disposal
IMPORTANT
Replacing the battery results in all BIOS settings returning to their
default settings. BIOS settings other than default must be reconfigured
after replacing the battery.
This computer contains a sealed lithium battery that may need to be
replaced during the life of the computer.
At the end of its life, the battery contained in this computer should be
collected separately from any unsorted municipal waste.
ATTENTION: The backlight assembly in this computer can contain mercury. At
the end of its life, this equipment should be collected separately from any
unsorted municipal waste.