Rockwell Automation Allen-Bradley 1443 Series, Технические данные инструкция

Страница: 11 / 60

Rockwell Automation Publication 1443-TD001D-EN-P - March 2019 11
1443 Series Accelerometers Specifications
Sensor Quick Reference
General-purpose Accelerometers
General-purpose industrial accelerometers are recommended for permanent installation onto machinery or route-based
vibration data collection in predictive maintenance and condition-monitoring applications.
Sensors with Integral Cables
Included in the list of 1443 Series general-purpose Accelerometers are variants of the sensor that include integral 4.8 m
(16 ft) and 9.7 m (32 ft) cables. Sensors with an integrated cable are useful in wet or dirty (high particulate) areas.
Low Frequency Accelerometer
The accelerometer combines low-frequency response with high-output sensitivity to obtain the resolution characteristics
and output signal levels necessary for low-frequency measurements and analysis.
Table 2 - General-purpose Accelerometers
Purpose Cat. No Features Page
General-purpose Accelerometer 1443-ACC-GP-T • 100 mV/g
• 0.8…19 kHz
• Top Exit 14
1443-ACC-GP-S • 100 mV/g
• 0.2…15 kHz
• Side Exit 16
General-purpose Accelerometer
(with Integral Cable) 1443-ACC-GP-T16-SI • Integral ~5 m (16 ft) Cable
• 100 mV/g
• 0.8…15 kHz
• Top Exit 18
1443-ACC-GP-T32-SI • Integral ~10 m (32 ft) Cable
• 100 mV/g
• 0.8…15 kHz
• Top Exit 20
1443-ACC-GP-T16-SC • Integral ~5 m (16 ft) Cable
• Shield Case Grounded Cable
(1)
• 100 mV/g
• 0.8…15 kHz
• Top Exit
(1) Sensors with the shield wire grounded to the case are non-standard. See Shield Wire Isolation Sensor and Cable Selection on page 8 before ordering.
22
1443-ACC-GP-T32-SC • Integral ~10 m (32 ft) Cable
• Shield Case Grounded Cable
(1)
• 100 mV/g
• 0.8…15 kHz
• Top Exit
24
Table 3 - Low Frequency Accelerometer
Purpose Cat. No Features Page
Low Frequency Accelerometer 1443-ACC-LF-T • 500 mV/g
• 1.5…10 kHz (5%)
• 0.1…15 kHz (3db)
• Top Exit 26