Rockwell Automation 9VT201-007HTNNN, Руководство пользователя, Страница: 102 / 224

3-40 Programming and Parameters
Publication 9VT-UM001D-EN-P
D
YNAMIC CON
T
R
O
L
R
est
ar
t M
o
de
s
179 [Sleep Wake Ref]
Selects the source of the input controlling
the Sleep-Wake function.
Default:
Options:
2
1
2
“Analog In 2”
“Analog In 1”
“Analog In 2”
180 [Wake Level]
Defines the analog input level that will
start the drive.
Default:
Min/Max:
Units:
6.000 mA, 6.000 Volts
[Sleep Level]/20.000 mA
[Sleep Level]/10.000 Volts
0.001 mA
0.001 Volts
181
181 [Wake Time]
Defines the amount of time at or above
[Wake Level] before a Start is issued.
Default:
Min/Max:
Units:
1.0 Secs
0.0/30.0 Secs
0.1 Secs
180
182 [Sleep Level]
Defines the analog input level that will
stop the drive.
Default:
Min/Max:
Units:
5.000 mA, 5.000 Volts
4.000 mA/[Wake Level]
0.000 Volts/[Wake Level]
0.001 mA
0.001 Volts
183
183 [Sleep Time]
Defines the amount of time at or below
[Sleep Level] before a Stop is issued.
Default:
Min/Max:
Units:
1.0 Secs
0.0/30.0 Secs
0.1 Secs
182
P
o
wer Los
s
184 [Power Loss Mode]
Sets the reaction to a loss of input power.
Power loss is recognized when:
•
DC bus voltage is
≤
73% of [DC Bus
Memory] and [Power Loss Mode] is
set to “Coast”.
•
DC bus voltage is
≤
82% of [DC Bus
Memory] and [Power Loss Mode] is
set to “Decel”.
Default:
Options:
0
0
1
2
3
4
“Coast”
“Coast”
“Decel”
“Continue”
(1)
,
“Coast input”
(1)
,
“Decel input”
(1)
,
013
185
(1)
Frames 2, 3, 4, 5, & 6
185 [Power Loss Time]
Sets the time that the drive will remain in
power loss mode before a fault is issued.
Default:
Min/Max:
Units:
0.5 Secs
0.0/60.0 Secs
0.1 Secs
184
186 [Power Loss Level]
Sets the level at which the Power Loss
Mode selection will occur.
Default:
Min/Max:
Units:
0.0 VDC
0.0/999.9 VDC
0.1 VDC
F
ile
Gr
oup
No
.
Parameter Name and Description
See page 3-2 for symbol descriptions
Values
Re
lated
2…6