manualshive.com logo in svg

Rockwell Automation 700-1384-01, Руководство пользователя

Поделиться
Скачать
Rockwell Automation 700-1384-01 Скачать руководство пользователя страница 51

Safety Guidelines

Magnetic Hazards

QuickStick HT User Manual

51

Rockwell Automation Publication MMI-UM007F-EN-P - September 2020

Magnetic Hazards

The QuickStick HT transport system uses high-strength Neodymium Iron Boron (NdFeB) 
magnets in the magnet arrays that are attached to the vehicles. The proper precautions for 
using high strength magnets must be observed.

MAGNETIC FIELD HAZARD:

 Strong magnets in use.

To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
arrays.

CRUSH HAZARD:

 Strong magnets in use.

To avoid severe injury from strong magnetic attractive
forces:
•

Handle only one vehicle or magnet array at a time.

•

Do not place any body parts (for example, fingers) 
between a magnet array and any QuickStick HT motors, 
ferrous material, or another magnet array.

•

Magnet arrays or vehicles not being used must be secured 
individually in isolated packaging.

NOTICE

Strong magnets in use.

To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (for example, memory disks/chips, credit cards, and
tapes) and electronics away from the magnet arrays.

Содержание 700-1384-01

























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды