Rockwell Automation 6185-D Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 64

Rockwell Automation 6185-D Скачать руководство пользователя страница 37

Industrial 18.1" Flat Panel Monitor

37

Publication 6185-UM001B-EN-P

Figure 28

Controls on the Versa Mount (6185-V) Unit

Table D
Control Keys for the Versa Mount Unit

Control

Description

(Select)

This operation key:

•

Displays the main menu.

•

Displays the control box for the highlighted selection when the main menu is
displayed.

•

Toggles between the control box and any of its secondary control boxes.

•

Answers “Yes” to questions.

< >

(Down, Up)

Arrow keys have two functions:

•

If the main menu is displayed, pressing these keys moves the cursor to desired
selection that needs adjusting.

•

If a control box is displayed, may be used to adjust the value for the control.

(Exit)

This operation key:

•

Records changes made to the selection when the control box for a desired
selection is displayed. The control box closes and the main menu is displayed.

•

Exits the main menu. This action memorizes any settings and completes the
adjustments.

•

Answers “No” to questions.

For information on adjusting the controls to achieve the best screen
image, refer to the workstation setup information on Page 41.

«
...
35
36
37
38
39
...
»

Содержание 6185-D

































































Отзывы:

Нет отзывов