Rockwell Automation 1763-L16AWA, Руководство по установке

Страница: 3 / 44

2 3
EXS
40 | Instruction Manual
17-04-2014 | EN | EXS40
1. Symbols
Danger Manually operated
Attention
Additional manuals Electrically operated
2. General warnings
This manual has been prepared by qualified personnel, not by trainees or DIY enthusiasts.
The person tasked with assembling, disassembling, maintaining or putting the door system into operation must carefully
read, understand and follow this manual.
In case of doubt, always contact DOCO International.
To avoid severe personal injury, carefully read and observe all the indications and warnings in this manual.
- This manual describes the assembly, disassembly and maintenance of your Residential Door System
EXS
40.
This may be supplemented by other manuals, for example the panel assembly manual and operator manual (if
applicable).
- This Residential Door System
EXS
40 has been designed in accordance with the latest European standards.
However, you must check yourself whether this standard corresponds with the local national standard.
- All measurements are in millimetres unless otherwise specified.
- After installation, ensure that the CE marking label has been completed and attached.
- Keep this manual in a safe place, near the residential door.
- Subject to technical changes, without written notice.
2.1 Safety requirements for assembly, maintenance and first use.
- This Residential Door System
EXS
40 may only be mounted, connected and put into operation by qualified
personnel.
- Make sure that the power is switched off and remains switched off while electrical work is being carried out!
- Never bridge safety devices!
- Adding or omitting parts can compromise the door operation and thus the safety of the Residential Door System
EXS
40.
This is therefore strongly discouraged!
- Some parts may contain sharp edges: use protective gloves.
- All references in this manual to the door/component handing are as viewed from the inside looking out, unless
otherwise specified.
- Never use the Residential Door System
EXS
40 if visual damage is observed, particularly with respect to cables,
springs and safety devices.
- When performing assembly/maintenance, always wear at least gloves and safety boots and safety goggles for all
drilling/cutting activities!
- Make sure that you always have a stable environment in which to perform your work.
- Secure the assembly/maintenance site with safety ribbon to keep others at a distance.
- Maintenance must only be performed by a qualified company and/or qualified personnel.
- Make sure there is enough light.
- Only use appropriate tools.
3. Terms and conditions
Our general terms of delivery and payments apply to all our offers, agreements or subsequent revisions.
A copy of our terms and conditions are available on request or may be downloaded from our website:
www.doco-international.com
Subject to technical changes without notice