4
tuning frequency to protect against sub woofer unloading.
LOGIC-START TURN ON CIRCUITRY:
The amplifier will turn on automatically as soon as it senses a signal from your headunit.
BASS KNOB:
Included with this amplifier is a dashboard bass remote control.
PROTECTION CIRCUITRY:
Rockville amplifiers incorporate many outstanding protection circuits to help protect the amplifier from being damaged during operating conditions.
Thermal Protection: When the amplifier reaches an unsafe operating temperature of 80 degrees celsius the amplifier will turn off.
If you live in a hot climate we suggest installing additional cooling fans in your trunk to exhaust the hot air which can build up in the trunk. This will help keep the ambient
temperature in the trunk as low as possible so that your amps work flawlessly and without any musical interruption.
Speaker Short Circuit Protection: Should your speakers short circuit due to voice coil burn out, or should the amplifier sense an impedance too low to handle, the Protection
LED will light, indicating a diagnostic condition. Turn off your system, disconnect one speaker at a time and try to determine which speaker might be faulty. Correct the condition
and restart the amplifier. You must reset the amplifier by turning it OFF and then ON again by the Remote power connection after correcting a diagnostic condition. (Turn your
radio off and then on again.)
Clipping or total shutdown may also be a result of a bad ground connection or loose ground. If you find that your speakers and speaker wires are not shorted, please check
your ground connection.
Input Overload Protection: This circuit will either shutdown the amplifier completely or make the amplifier spurt on and off indicating that it is in a diagnostic condition. Turn the
system off and reduce the gain on the amplifier or volume from your head unit, this should result in a corrected condition.
DC Offset Protection: Should any DC voltage try to enter the amplifier via the speaker terminals it will cause the amplifier to shut down and not operate until this condition is
remedied. This circuit will also protect damaging high DC voltages from reaching your speakers should your amplifier ever malfunction.
Features
Содержание RVA600.1
Страница 1: ...RVA600 1 4 OHM MONOBLOCK...
