The RV265BT comes with a multifunction Bluetooth enabled remote control with a 3.5mm auxillary input port (3.5mm to 3.5mm cable included).
The remote conveniently mounts to the handle bars for easy access. The unit is waterproof and features oversized buttons for use with gloves.
To pair the unit with your Bluetooth enabled device follow the simple steps below and you’ll be listening to your favorite tunes in no time.
• Make sure that your devcice is set to “Discoverable”. Connect the remote control to the corresponding cable from the RV265BT.
Once connected the unit will automatically begin to search for discoverable Bluetooth devices. The LED will flash two times
every second. This indicates that it is searching.
• Once a Bluetooth device is found, the remote control will go into pairing mode. You will hear a long tone and the LED
will flash once every second until pairing is complete. Once paired the LED will remain on.
• If the remote control is disconnected from the device it is paired to, it will autopmatically try to pair with that
device the next time it is turned on. If the previous device is not found in 4 seconds, the remote control will
begin to search for other discoverable devices.
AUXILLARY CONNECTION
• To connect a non Bluetooth device the remote features a 3.5mm input port. It is located on the left side of the unit. Simply use the included 3.5mm to
3.5mm mini jack cable to connect the device to the remote control. Please note that connecting a device to the auxillary port will stop Bluetooth function.
MULTIFUNCTION BLUETOOTH REMOTE CONTROL
SPECIFICATIONS
• Power: 250 Watts RMS, 500 Watts Peak
• Frequency Response: 35Hz - 22KHz
• SPL: 103dB @ 1w/1m
• Height: 7.8˝ (198mm), Length: 26.7˝ (680mm), Width: 10.8˝ (275mm)
ACCESSORIES
• 2 Heavy duty mounting straps for multiple mounting options
• 2 Heavy duty zip ties
• MP3 / Phone soft case with mounting strap
• 5 foot 3.5mm to 3.5mm mini jack MP3 cable
• Multifunction remote control with 3.5mm jack
• Cigarette lighter power connector
Press to go to next
track. Press and hold
to raise volume.
Indicates Bluetooth
status.
Power status.
Press to go to previous
track. Press and hold
to lower volume.
Press once to play.
Press again to pause.
