Rockville RPG10BT, Руководство пользователя

Страница: 15 / 22

BT
1. MP3 Player controls. Previous / Next track buttons also serve as volume
controls. For track control quickly press button. For volume control press an
hold button. Press Play button once to play track, press again to pause.
2. USB and SD/MMC Card input.
3. Mode control switches between input modes: Bluetooth, USB, and SD/MMC.
4. 2 band equalization control panel.
• Bass adjust the low frequencies to +/-15dB.
• Treble adjust high frequencies to +/-15dB
5. This knob controls the Mic input volume.
6. Multipurpose input port.
• Mic input port accepts XLR type connectors and is designed to suit a wide
range of balanced and unbalanced signals. We recommend using profesional
balanced dynamic, condenser or ribbon mics as they are least likely to be
affected by interference. Low cost, high impedance mics can be used,
however the level of background noise is higher since an unbalanced circuit is
far more susceptible to interference.
• Line input port accepts balanced and unbalanced 1/4˝ TRS plugs. It accepts
signals from a variety of sources such as keyboards, electronic drums, tape
recorders, mixers, etc. It will not process microphone input. When you use an
unbalanced 1/4˝ TRS plug, the line input automatically turns the ring intto
ground.
7. Master volume control knob.
8. Auxiliary / MP3 input selector switch.
9. Pre-Amp RCA input / output jacks.
10. Auxiliary input / output volume control.
11. Power LED indicator.
12. Amplifier clip limit LED indicator.
13. Power cord
14. Power switch