Rockville ROCKBAR, Руководство пользователя

Страница: 7 / 12

ROCKBAR
1. Power-on the ROCKBAR by connecting it to an AC power source and pressing the
Power/Standby button.
2. Plug in your USB flash drive. The unit will automatically read the files and begin playing music.
3. You can control playback from the ROCKBAR (volume) or the remote control (volume,
tracks, play/pause, stop).
4. To exit USB mode you can remove your USB flash drive or press the Power/Standby
button on the side of the ROCKBAR to select another mode. To return to USB mode
plug in a USB flash drive or press the Power/Stand-by button until the LCD display
shows the letters "US". You can also press the INPUT button on the remote control to
exit from or return to USB mode.
Please note: the ROCKBAR supports USB drives up to 32Gb and the MP3 file format.
The USB port does not support charging.
volume and the ROCKBAR’s volume independently.
The ROCKBAR can be connected to your TV or receiver via an ARC enabled HDMI port.
ARC stands for "Audio Return Channel" and has been available on most TV's, receivers,
and soundbars since the HDMI 1.4 standard was introduced in 2009. The ARC protocol
offers two-way communication between devices over a single HDMI connection. Simply
put, this means that you can use the HDMI ARC port (if available) as an input and an au-
dio output. Check your specific device's manual to see if it features an HDMI ARC port.
1. Power-on the ROCKBAR by connecting it to an AC power source. Press the Power/
Standby button on the side of the ROCKBAR and continue to press it until the LCD
display shows the letters "Hd". You can also press the INPUT button on the remote
control to reach HDMI mode.
2. Connect a standard HDMI cable to your sound bar and connect the other end to your
TV's HDMI ARC port. Ensure the TV is set to HDMI ARC output. Most TV's feature
ARC output over only one HDMI port. This port should be labeled as HDMI ARC. If the
HDMI ports aren't clearly labeled, you can check the TV manual, which should indicate
which HDMI port to use and if the ARC feature needs to be manually activated.
Please note: the ROCKBAR must be plugged into an ARC enabled HDMI port. It will not
work with a standard HDMI port. Check your specific device's manual to see if it features
an HDMI ARC port.
USB
HDMI (ARC)
AUX
Use the 3.5mm AUX jack to connect computers or any other external sound source with
a 3.5mm output.
1. Power-on the ROCKBAR by connecting it to an AC power source. Press the Power/
Standby button on the side of the ROCKBAR and continue to press it until the LCD
display shows the letters "AUX". You can also press the INPUT button on the remote
control to reach HDMI mode.
2. Use a 3.5mm to 3.5mm cable to connect the ROCKBAR to the sound source.
3. Playback functions (play/pause, volume, tracks) are not available in AUX mode.
Please note: you will need to adjust the device’s volume and the ROCKBAR’s volume
independently.