Rockville ROCK PARTY 8, Руководство пользователя

Страница: 4 / 12

2
1. LED ON/OFF button
2. ¼˝ Unbalanced microphone inputs. Please note: We recommend using professional
unbalanced dynamic mics as they are least likely to be affected by interference. Low
cost, high impedance mics can be used, however the level of background noise is
higher since an unbalanced circuit is far more susceptible to interference.
3. 3.5mm AUX input
4. Charging port
5. USB/SD input ports
6. Power button
7. Mic volume
8. Master volume
9. Light: Press the LIGHT button to cycle through the 7 LED colors. Press and hold the
button to cycle through the available modes (see page 6).
10. REC - allows for recording of input from wired mics connected to the speaker.
11. Echo -/Echo +: use these buttons to adjust the mic echo effect.
12. Repeat: Press once to repeat single song, press twice to repeat all songs.
13. Play/Pause button: Press the button to pause or resume audio playback in USB/SD
and Bluetooth mode.
Previous/Next buttons: During USB/SD and Bluetooth playback, use these buttons to
move to the previous or next track.
14. Mode button: Press to switch between input modes: Bluetooth, USB/SD, and AUX input.
15. TWS: Press to activate wireless stereo mode.
16. LED display (on the front of the unit)
17. Mega bass: This button gives a boost to low frequencies for increased bass response.
Functions
7
1
12
11
8
6
10
13
9
2 3 4
16 15 18 14 17
5