4 to 16-0hm Direct Speaker Output (Binding Post Terminals)
You can connect two speakers to this terminal as long as the final impedance does not
fall below 4 ohms. Although it is possible to connect more than two speakers to these
terminals, it is not recommended. Please consult a professional if you intend to do so as
incorrect installation could lead to irreparable damage to your amp and speakers.
D
WARNING: Total impedance of your speakers must not be less than 4 ohms.
D
CAUTION: We recommend you
consult a professional if you plan on
wiring more than 2 speakers to the 4 to
16-ohm output.
D
WARNING: Do not use Direct Output (binding
posts) and Zone Output (screw connectors) at
the same time. Doing so will cause permanent
damage to the amp.
12
4-Ohm Direct Speaker Connection (wired in series)
4ohm
4ohm
DIRECT SPEAKER ( UTPUT
100V
t
70V
4-160
COM
0 0 0 0
8-Ohm Direct Speaker Connection (wired in series)
