BASS GIG
1. The Level knob is used to regulate the output level of the subwoofer. It allows you
to set the balance between the speakers and subwoofers.
2. Full Range XLR/TRS 1/4
"
combo input will accept line input signal from any lin
level device with a balanced output jack.
3. Full Range XLR output will send the signal from the Full Range XLR inputs to
another device.
4. Polarity switch button reverses polarity of subwoofer and is dependent on the
placement of the subwoofer relative to the speakers.
5. Indicator lights.
• Limit LED lights when limiter circuit automatically detects signal is being over
driven so that signal does not clip & distort.
• Amplifier Clip LED indicator lights up when the amplifier is near clipping. An
occassional flickering is acceptable. If LED is lit continously adjust the Level control
and reduce the output level of connected sources. Failure to do so may lead to
premature failure of your speaker.
• Signal LED indicator. Indicates signal input from connected sources.
• Power LED indicator.
6. Front LED Power on/off button.
7. D-XSUB LED indicator.
8. Bass boost selector.
• Boost increases the high end bass frequencies by 3dB.
• Extended Low Frequency increases the low frequency range.
9. Low Pass Frequency switch offers the user three Low Pass frequency settings.
10. Voltage selector switch.
11. IEC AC Power socket / user serviceable fuse compartment
12. Power switch
13. Cooling fan
