Rockville RBG-15F, Руководство пользователя

Страница: 11 / 14

BASS GIG
1. Full Range XLR input will accept line input signal from any line level device with a
balanced output jack.
2. Full Range XLR output will send the signal from the Full Range XLR inputs to
another device.
3. Amplifier clip limit LED indicator. Lights up when the amplifier is near clipping. An
occassional flickering is acceptable. If LED is lit continously adjust the Level control
and reduce the output level of connected sources. Failure to do so may lead to
premature failure of your speaker.
4. Full range signal LED indicator. Indicates signal input from connected sources.
5. Protect mode LED indicator. Indicates when amplifier has entered into protect
mode.
6. Power LED indicator.
7. Phase switch reverses polarity of subwoofer and is dependent on the placement of
the subwoofer relative to the speakers.
8. The Subwoofer Crossover knob allows you to set the crossover frequency. The
Level knob is used to regulate the output level of the subwoofer. It allows you to set
the balance between the speakers and subwoofers.
9. High Pass Pre-Amp XLR outputs are used to send the incoming signal to a full
range active speaker or power amp.
10. Heat sensitive, variable speed auto turn on fan. Fan activates when temperature
reaches 131° Farenheit. Speed is automatically adjusted as temperature increases
or decreases.
11. Ground Lift switch. The ground lift switch eliminates unwanted hum and buzz
by interrupting the ground loops between equipment, preventing current flow
along the cable shield between two devices.
12. IEC AC Power socket / user serviceable fuse compartment
13. Power switch