Rockville Power GIG RPG-082K, Руководство пользователя

Страница: 6 / 16

6
It is best practice to set your input volume (gains) in this manner:
1. Unplug all inputs except for the one you wish to set the gain for. In this instance, the
AUX 1 RCA inputs.
2. Set the line level input device volume (smart phone, tablet, MP3 player, etc.) to 60%.
3. Slowly turn up the VOLUME. As soon as the clip indicator LED goes on or you hear
any distortion – turn it down one or two notches.
Your RPG features a balanced microphone input accessible via a combo XLR/ ¼˝ TRS input.
1. Switch OFF your RPG.
2. Plug in your microphone into the jack marked MIC IN using an XLR or ¼˝ TRS cable.
3. Switch ON your RPG.
4. Refer to the “Setting Level Controls” section of this manual for instructions on how to
properly adjust the input volume (gains).
Always stand behind the RPG when making your microphone adjustments to avoid feed-
back distortion.
Microphone Presentations
Setting Level Controls
2
1 2
POWER
CLIP
You can connect an additional stereo signal source (such as CD players, DVD music play-
ers, MP3 players, etc) without the use of a mixer console. Plug the device directly into the
combo XLR/ ¼˝ TRS input labeled LINE IN.
1. Switch OFF your RPG.
Line Input
A. Because mixers feature two volume controls (channel and master), when con-
necting one via the XLR line in port, the procedure is slightly different. Set to
RPG’s volume to 50% and set the mixer master volume to 50%. Make the adjust-
ments in step 3 on the mixer channel level control. If after making these adjust-
ments the signal still isn’t strong enough, you can additionally boost the signal by
turning up the RPG’s VOLUME control.
B. When adjusting the MIC LEVEL control, you must speak into the microphone
and adjust the control as needed. This is because adjustments to the mic input
are a matter of mic volume in relation to the music volume and not necessarily a
clipping issue.
3