Rocktron Velocity 100LTD, Руководство пользователя

Страница: 3 / 12

3
NOTE: IT IS VERY IMPORTANT THAT YOU READ THIS SECTION TO PROVIDE YEARS OF
TROUBLE FREE USE. THIS UNIT REQUIRES CAREFUL HANDLING.
1. Read all instructions contained in this manual
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.
9. This product may be equipped with either a polarized alternating-current line plug (which is a
plug that has one blade wider than the other) or a plug with two blades with a third grounding
prong. The wide blade or the third prong are provided as a safety feature. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched - particularly at the plugs,
convenience receptacles, and that the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Do not use this product with any case, stand, tripod, bracket or table that is not specified by
the manufacturer. Where it is specified by the manufacturer insure that the case, stand,
tripod, bracket, etc. is properly adjusted and setup. Extra care and caution should be taken to
avoid tip over and injury.
13. Unplug this apparatus during lightning storms or when unused during long period of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus or if the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT. THIS EQUIPMENT SHOULD BE
SERVICED BY QUALIFIED PERSONNEL ONLY. DO NOT MAKE ANY INTERNAL
ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT ANY TIME OR TAMPER WITH
INTERNAL ELECTRONIC COMPONENTS AT ANY TIME. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY VOID THE WARRANTY OF THIS EQUIPMENT, AS WELL AS
CAUSING SHOCK HAZARD.
OPERATING TEMPERATURE
Do not expose this unit to excessive heat. This unit is designed to operate between 32° F and 104° F
(0° C and 40° C). This unit may not function properly under extreme temperatures.
Precautions - Please read!!