background image

BOOST Switch:

This switch BOOSTS works in conjunction with the “+” switch.  To 

Turn on the “Boost” function flip the switch to “ON”  

“+” Switch:

This works in conjunction with the “Boost Switch.”  When the Boost 

switch is OFF or in the down position the “+” switch is not active.  

When the Boost switch is “ON” and the “+” switch is in the down 

position you will get an extra gain stage that replicates the 80’s Brit-

ish type of tone.  When the “+” switch is “UP” you get an additional 

gain stage the replicates the 90’s British amps essentially adding an 

entire tube to the front end.

BASS control:

This control is used to determine the amount of low frequency or 

Bass present in the signal.

MIDDLE control:

This control is used to determine the amount of mid frequency pres-

ent in the signal.

TREBLE control:

This control is used to determine the amount of high frequency or 

Treble present in the signal

AFTERBURNER Switch

:

This switch works in conjunction with the DRIVE control.   After 

the EQ section is another gain stage.  When the AFTERBURNER 

is turned “ON” this switch emulates a post phase inverter master.   

When on use the DRIVE control to adjust amount of DRIVE present 

in the AFTERBURNER stage.

6

7

8

9

10

11

Front Panel....continued:

Содержание Valve Sonic Plexi















Отзывы: