Rocktron Taboo ARTIST, Руководство пользователя, Страница: 37 / 79

3 3
PITCH SHIFT Function
The PITCH function is available in configurations displaying “PSHF” in the configuration title.
Pitch Shifting is used to change the pitch of the input signal to produce a harmony note based on the input signal. The
harmony voice can be of any fixed interval—up to one octave above the input signal to two octaves below—and is selected
in 20-cent increments. Fine adjustment can be made in one cent (1/ 100th semitone) increments.
Pitch Shift parameters
D
ESCRIPTION
The PITCH SHIFT IN/OUT parameter determines whether the Pitch Shifter is active or bypassed for the
current preset.
The LEVEL parameter determines the volume of the pitch shifted signal. The DIR/EFF MIX parameter in
the Mixer function also affects this volume.
The PAN parameter allows you to pan the shifted signal to the left or right channel.
The PITCH parameter selects what harmony note the Artist will produce based on the input note. The
value displayed for this parameter represents the number of cents that the signal will be shifted (adjustable
in 20-cent increments). Each 100 cents (or five 20-cent steps) above or below “0” represents the number of
half-steps the shifted signal will be from the input signal.
This parameter is adjustable from “-2400” to “+1200”, where “-2400” = two octaves below the input signal,
“0” = unison and “+1200” = one octave above the input signal. Refer to the table below to determine the
cent value for each fixed interval.
The FINE parameter allows for adjustment in 1-cent steps for fine adjustment of the harmony note.
The SPEED parameter determines the amount of time delay used in the shifting process. SLOW results in
the longest delay and the highest quality shifted signal (especially at larger amounts of pitch shift), FAST
results in the least delay, but the lowest quality shifted signal. This setting should only be used for slight
amounts of pitch shift.
P
ARAMETER
PITCH SHIFT I/O
LEVEL
PAN
PITCH
FINE
SPEED
pitch shift