1
4
5
2
3
6
7
8
Right Side
Left Side
Functions
1=
2=
3=
4=
5=
6=
7=
8=
This switch activates the HUSH circuitry. Step on the switch
again to deactivate the HUSH.
Threshold Control - Turn Clockwise to increase the amount of
HUSH added to the signal. In high gain situations turn the
Threshold more towards “Max”. In lower gain settings turn
Theshold more towards “MIN”. Set this control to suit your
taste.
“ACTIVE” LED - When lit the HUSH is “active” or “on”
9 Volt DC Adapter Input
Input Jack
Output Jack
Battery Compartment - To access, remove two screws, pull
cloth tab to remove the battery. When installing a new battery,
push battery in over cloth tab so that you can pull out the
battery during your next replacement.
Battery Compartment screws - remove to access battery.
