20 GB/IE
Press the button again to stop the stopwatch.
j
The display
5
will indicate the time between start
and stop.
j
If you press the ST. / STP. button
4
again, the time will
continue to run again.
j
Press the RESET button
1
for 2 seconds to reset the
stopwatch display to 0 again.
note:
With time measurements longer than one hour,
the hours, minutes and seconds are indicated in the
time display.
Q
Timing / storing and
retrieving lap times
Timing and storing lap times
You can time and store up to 10 lap times.
j
Press the MODE button
2
as often as necessary until
CHr
appears in the display
5
.
j
Press the ST. / STP. button
4
to start the stopwatch.
j
Press the RESET button
1
to time a lap.
The lap number will flash in the time display
10
and the
lap time will be indicated in the display
5
for about
10 seconds. After that, the time will continue.
j
Press the RESET button
1
again to time another lap.