manualshive.com logo in svg

RockShox SUPER DELUXE, Руководство по обслуживанию

Поделиться
Скачать
RockShox SUPER DELUXE Скачать руководство пользователя страница 26

26

Piston Service

Align the guide pin on the piston with the guide hole in the RCT/NUDE 

Align the guide pin on the piston with the guide hole in the RCT/NUDE 

Lock Piston Tool. Use your hand to start threading the lock piston on, 

Lock Piston Tool. Use your hand to start threading the lock piston on, 

then use a 24 mm open end wrench on the RCT/NUDE Lock Piston 

then use a 24 mm open end wrench on the RCT/NUDE Lock Piston 

Tool to tighten the lock piston to 4.5 N·m (40 in-lb).

Tool to tighten the lock piston to 4.5 N·m (40 in-lb).

Apply pressure to the RCT/NUDE Lock Piston Tool when installing 

Apply pressure to the RCT/NUDE Lock Piston Tool when installing 

the lock piston to prevent the tool from slipping on the piston and 

the lock piston to prevent the tool from slipping on the piston and 

damaging the guide pin.

damaging the guide pin.

NOTICE

Do not bend the guide pin. Bending or breaking the guide pin will 

damage the piston assembly. 

Apply a thin layer of grease to the compression rod and detent ball.

Apply a thin layer of grease to the compression rod and detent ball.

Press on the top hat assembly nut to install the compression rod and 

Press on the top hat assembly nut to install the compression rod and 

top hat into the main piston assembly, then align the guide pin in the 

top hat into the main piston assembly, then align the guide pin in the 

piston assembly with the guide pin hole in the top hat assembly, and 

piston assembly with the guide pin hole in the top hat assembly, and 

press the top hat assembly down fully.

press the top hat assembly down fully.

NOTICE

Do not press the top hat assembly into the main piston assembly by 

the propellers as that can damage the propellers. 

Install the lockout spring and dummy shaft onto the main piston 

Install the lockout spring and dummy shaft onto the main piston 

assembly. Press down on the dummy shaft to compress the spring and 

assembly. Press down on the dummy shaft to compress the spring and 

start the threads on the dummy shaft. Hold the main piston in place, 

start the threads on the dummy shaft. Hold the main piston in place, 

and tighten the dummy shaft.

and tighten the dummy shaft.
Remove the damper shaft from the vise and set aside.

Remove the damper shaft from the vise and set aside.

Lock Piston Tool

24 mm

4.5 N·m (40 in-lb)

24 mm

18 

19 

20 

24 mm

4.5 N·m (40 in-lb)

23 mm

21 

Содержание SUPER DELUXE







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды